Pillow traps or deep water traps are known for their versatility. These traps can be fished laying on bottom in shallow or deep water, or can even be stood up on their end with part of the trap out of the water when oxygen becomes a problem. They are approx. 14 inch wide and have flews in three corners, and a dump hole in the other corner. They are made with 3/4 inch PVC coated, 19 gauge hex wire. The shorter traps tend to catch better because the flews are closer together, but the longer traps are better when oxygen is a problem.

The 4842 trap is a longer cut trap that makes it approx. 17 inch wide and is very popular with commercial fishermen. It comes with only two flews on the bottom of the trap.

These traps ship flat. To open up, simply unfold and pull out to form a pillow shape.

A/H Additional handling fees apply when shipping this product.

Pyramid traps come with an easy grip molded top in either standard 4 inch height or an 8 inch height for fishing deeper water. 24 inch traps have an approx. height of 17 inch to the bottom of the top and the 22 inch traps have a height of approx. 15 inch to the bottom of the top. The 8 inch top of course can add four inches to the depth of water and you can fish with either trap. They are made with 3/4 inch mesh, 19 gauge, PVC coated hex wire.

The 24 inch trap is the larger trap which allows the crawfish to live longer when oxygen levels drop. The 22 inch trap is a little smaller and compact, they are more rigid, don't take up as much space, and tend to catch better because the flews are closer together.

"R" in the stock number means the trap has a metal rod installed to help keep them upright.

"T" in the stock number means the trap has the 8 inch top.

"TR" in the stock number means the trap has both the rod & the 8 inch top.

Traps are partially collapsed before shipping to save you money on shipping fees.

A/H Additional handling fees apply when shipping this product.

This PVC work glove is 18" with flock lining for warmth and comfort.

They are very popular for use when crawfishing to protect your hands from chafing caused by crawfish and the wire. One size fits most.

Crawfisherman Gloves
GL-PVC $ 4.95 per Pair, for 12 or more $ 49.92 per dozen pair

Crawfish rakes are useful for collecting bait sized crawfish from road ditches or small ponds. Use the rake to pull through the grass, knocking the crawfish off the grass and into the net.

Frame is 8" by 19", treated net has 1/4" mesh. Complete unit comes with 10-foot handle, fully assembled rake is store pickup only, it cannot ship. The frame with net can be shipped, so you can install it on a pole at home. The pole is a standard closet rod that can be purchased at any hardware store. To install, use two hose clamps.

Metal Frame with Treated Nylon Net
CF-FRAME2 $ 34.95 per Each

Metal Frame without Net
CF-FRAME $ 10.95 per Each

Replacement Net
CF-NET $ 15.95 per Each

These nets are great for catching crawfish out of ditches, small ponds, and backwater. Unlike other imports, our nets come with nylon netting as opposed to cotton so you will get years of enjoyment out of them. Approximate height 19".

19" square net
CF-1 $ 29.95 per Dozen

17" square net
CF-2 $ 23.95 per Dozen

4" Top for crawfish traps
CFT-T $ 2.00 per Each

8" Top for crawfish traps
CFT-TT $ 3.60 per Each

24" Rods for crawfish traps
CFT-R $ 1.87 per Each

Clips for rods
CFT-C $ 0.31 per Each

Buttons for rods
CFT-B $ 0.37 per Each

"C" ring pliers and rings are for building or repairing your own traps. Spring loaded to hold rings into position.

"C" ring pliers
CF-P $ 19.95 per Pair

1/2" rings for use in building traps, nets, etc. Available in galvanized, stainless, and aluminum. Galvanized rings are the strongest, stainless steel will last the longest and aluminum rings are the cheapest. Rings are 16 gauge, galvanized are approx. 750 per lb, stainless approx. 850 per lb, aluminum approx. 1350 per lb.

Galvanized "C" rings
CFR-G $ 7.76 per lb

Stainless steel "C" rings
CFR-S $ 12.82 per lb

Aluminum "C" rings
CFR-A $ 15.10 per lb

PVC coated wire to build your own crawfish traps and great for any other DIY application. It's 3/4" hex mesh which meets Louisiana law. 150 ft per roll. 19 gauge wire is galvanized before coating.

A/H Additional handling fees apply when shipping this product.

24" wide, 150' long
CFW-24 $ 196.00 per Roll

30" wide, 150' long
CFW-30 $ 222.00 per Roll

36" wide, 150' long
CFW-36 $ 248.00 per Roll

48" wide, 150' long
CFW-48 $ 337.00 per Roll

1/2" by 1/2" square mesh wire, 24" wide x 150' long roll, 19 gauge. Commonly used for bream traps/bait traps.

PVC coated wire is galvanized before coating.

Black PVC coated
CF-245B $ 310.00 per Roll

Galvanized
CF-245G $ 235.00 per Roll

Burlap sheets are used for wetting and covering crawfish, to keep them moist and cool. Natural brown color.

8' x 10' sheet
BURLAP3 $ 22.95 per Each